Mon-Fri: 7AM-7PM, Sat: 8AM-5PM Licensed & Insured [email protected] Serving Davidson, NC

Sidewalk & Walkway Cleaning for Exposed Aggregate in Davidson, NC

Moderate-pressure wash for exposed aggregate. Walkway, front path and sidewalk cleaning that removes slippery growth, gum and grime. Typical cost $100-$250.

Looking for sidewalk & walkway cleaning for exposed aggregate in Davidson, NC? We look at the surface first, choose the right method and pressure for it, and give you a price before any work starts. For exposed aggregate, that means moderate-pressure wash.

Method and pressure

Moderate-pressure washCleaning method
Usually 1,500-2,500 PSI with a surface cleanerPressure

Cleaning solution: A concrete pre-treatment and degreaser as needed.

Cleaning exposed aggregate safely

Exposed aggregate concrete has stones showing at the surface. Too much pressure can loosen stones at the edges, and the surface looks best when cleaned and resealed.

Avoid: High pressure at edges and cracks, which can pop out aggregate.

How often: Clean yearly; reseal every 2-3 years.

Is it time for sidewalk & walkway cleaning for exposed aggregate?

  • Slippery paths after rain
  • Green or black growth along shaded edges
  • Gum, leaf stains or rust spots
  • Uneven, blotchy color

Where the grime comes from

  • Shade and moisture along the house
  • Foot traffic and dropped food or gum
  • Leaves and berries that stain
  • Sprinkler overspray

Safe steps for homeowners

  • Sweep away leaves before they stain
  • Scrub small slippery patches with a stiff brush and a deck or patio cleaner
  • Trim plants that keep paths shaded and damp

Not sure what you're looking at? The free stain identifier and safe pressure guide explain each stain and surface.

Why more pressure isn’t better

  • Slipping on wet, treated surfaces
  • Water and debris sprayed onto doors, windows and cars
  • Lifting loose joint material between slabs

How we handle sidewalk & walkway cleaning for exposed aggregate

  1. Sweep and inspect
  2. Pre-treat growth and stains
  3. Clean with a surface cleaner
  4. Detail edges and steps
  5. Rinse and post-treat

How much does sidewalk & walkway cleaning for exposed aggregate cost?

$100-$250Typical range for a typical front walk and side paths
About 1 hourTypical time on site
Once a yearRecommended frequency

What moves the price:

  • Size: square footage of siding, roof or flatwork
  • Condition: heavy growth, old stains and peeling finishes take longer
  • Access: number of stories, roof pitch, slopes and how close we can park
  • Add-ons: sealing, gutter brightening and other services done in the same trip

These are typical U.S. ranges, not a quote. You get an exact price before any work starts. For a quick estimate, try the pressure washing cost calculator.

Other services for exposed aggregate

Sidewalk & Walkway Cleaning for Exposed Aggregate in Davidson, NC

Shaded driveways, walkways and pool decks in North Carolina grow black mildew and algae quickly and can become slippery. Pre-treating the growth before washing, and post-treating after, keeps them clean longer than pressure alone.

Spring pollen season in North Carolina coats houses, cars, screens and patios in a yellow-green film, and pollen gives mildew something to feed on. Many homeowners book their wash after pollen season ends so the house stays clean longer.

Red clay soil is common in parts of North Carolina. Rain splashes it onto the bottom of the siding, walls and walkways, and its iron-rich color can stain light surfaces. It usually needs a dedicated clay or rust cleaner rather than pressure alone.

Besides Davidson (ZIP codes 28035 and 28036), we handle sidewalk & walkway cleaning for exposed aggregate in Cornelius (1.6 mi), Mooresville (5.9 mi), Huntersville (6.3 mi) and Westport (7.9 mi). Call (555) 010-0000 for a free quote in Davidson.

Sidewalk & Walkway Cleaning for Exposed Aggregate: frequently asked questions

How much does sidewalk & walkway cleaning for exposed aggregate cost in Davidson, NC?

Sidewalk & Walkway Cleaning for Exposed Aggregate typically costs $100-$250 for a typical front walk and side paths, and usually takes About 1 hour. The exact price depends on the size and condition, and you get it before any work starts. Call (555) 010-0000 for a free quote.

Do you use high pressure for sidewalk & walkway cleaning for exposed aggregate?

For exposed aggregate: usually 1,500-2,500 PSI with a surface cleaner. What we avoid: high pressure at edges and cracks, which can pop out aggregate. We keep the pressure even and controlled, with the right tools for the surface.

Is sidewalk & walkway cleaning for exposed aggregate safe for my plants and pets?

We pre-wet plants and lawns, keep cleaning solutions diluted to what the surface needs, and rinse landscaping again when we finish. Keep pets and children inside until surfaces are rinsed and dry.

How often should I schedule sidewalk & walkway cleaning for exposed aggregate?

Clean yearly; reseal every 2-3 years. Shade, nearby trees, humidity and heavy traffic mean more frequent cleaning; sunny, dry spots can go longer. Our free cleaning frequency tool gives a recommendation for your climate.

What if it rains on the day?

Light rain doesn't stop most washing, but heavy rain, high wind, lightning and freezing temperatures do. If the weather isn't right, we reschedule at no charge. Our work is backed by a satisfaction guarantee.

More services

Popular Exterior Cleaning Services in Davidson, NC

Pre-Paint Washing for Fiber Cement Siding

Soft wash. Fiber cement siding is durable and holds paint well, but its factory finish can be marked by high pressure, and manufacturers' care guides generally recommend low-pressure cleaning.

Typical $250-$600

Gum Removal for Concrete

Pressure wash with a surface cleaner. Plain broom-finish concrete is the surface pressure washing is made for.

Typical $200-$1,000

Commercial Pressure Washing

Building washing and flatwork cleaning for offices, retail, restaurants, warehouses and other commercial properties, scheduled around your hours.

Typical $400-$2,000

Pressure Washing

High-pressure cleaning for driveways, walkways, patios, pool decks and other hard surfaces, with the pressure matched to each surface.

Typical $150-$600

Gum Removal

Removing chewing gum from sidewalks, entrances and plazas with hot water and steam.

Typical $200-$1,000

Roof Cleaning for Asphalt Shingle Roofs

Soft wash (no pressure). The black streaks on many asphalt roofs are a type of algae, often Gloeocapsa magma, that feeds on the limestone filler in shingles.

Typical $400-$1,000

Soft Washing for Asphalt Shingle Roofs

Soft wash (no pressure). The black streaks on many asphalt roofs are a type of algae, often Gloeocapsa magma, that feeds on the limestone filler in shingles.

Typical $300-$800

Driveway Cleaning for Concrete

Pressure wash with a surface cleaner. Plain broom-finish concrete is the surface pressure washing is made for.

Typical $150-$400

Rust Stain Removal for Concrete

Pressure wash with a surface cleaner. Plain broom-finish concrete is the surface pressure washing is made for.

Typical $150-$500

Exterior Window Cleaning

Exterior window cleaning, often done with a house wash, including frames, sills and screens.

Typical $150-$400

Pre-Paint Washing for Stucco

Soft wash. Traditional stucco is porous and holds moisture, which is why it streaks green and black in humid and shaded spots.

Typical $250-$600

Patio Cleaning for Concrete

Pressure wash with a surface cleaner. Plain broom-finish concrete is the surface pressure washing is made for.

Typical $150-$400

Ready for a cleaner home or business?

Get a free pressure washing quote in Davidson, NC. Tell us what needs cleaning and we'll give you a price and the next available date.

Call NowFree Quote